The short answer
The same ones as any other extension. Building regulations set results, not materials, so a SIPs extension needs approval and must meet the structure, fire, moisture, ventilation, safety and energy rules like brick would. What changes is how the panels show they comply.
On this page
People sometimes ask if SIPs are “approved”. That is the wrong question. The building regulations in England do not approve or ban building methods. They set the results a building has to achieve, and your SIPs extension has to achieve them like any other.
Does a SIPs extension need building regulations approval?
Yes. The Building Regulations 2010 cover the construction and extension of buildings, so a new room on the house is in. Planning permission is a separate question. You might need that as well, but building regulations approval is not optional.
The one exemption people hear about is for conservatories and porches. Approved Document L only lets an extension skip the energy rules if it is at ground level, has a floor area of 30 m² or less, has glazing that meets Part K, and keeps the wall, door or window that separates it from the house. A SIPs extension with a solid roof and an open-plan link to the kitchen is nowhere near that.
Which parts of the regulations matter for SIPs?
The approved documents give the official guidance on each part. For a SIPs extension these are the ones that do the work:
- Part A, structure. The panels, beams, fixings and foundations need an engineer’s calculations.
- Part B, fire. Building control will look at the linings inside and the walls near the boundary.
- Part C, moisture. Damp-proofing at the base and keeping the panels dry for life.
- Part F, ventilation. A well-sealed SIPs room needs planned ventilation.
- Part K, safety. Safety glazing in doors and low windows.
- Part L, energy. The U-values and the glazing limit, below.
- Part P, electrics. New circuits in a home are notifiable work.
That is not every part, but those are the ones you will hear about on a SIPs job. Your designer or supplier should be able to tell you how their system meets each one.
What U-values does a SIPs extension need?
Approved Document L sets the limits for new parts of an existing home in England. For an extension they are:
- Walls: 0.18 W/m²K.
- Roof: 0.15 W/m²K.
- Floor: 0.18 W/m²K.
- Windows: 1.4 W/m²K, or a Window Energy Rating of band B.
- Rooflights: 2.2 W/m²K.
SIPs reach these comfortably with the right panel and lining, which is one of the reasons people choose them. Ask for the U-value calculation for your exact build-up, not a brochure figure.
Is there a limit on glass?
Yes, and it catches a lot of extensions. Count the windows, roof windows, rooflights and doors together. Under Approved Document L you want that total to stay at or under 25% of the extension’s floor area, plus whatever window and door area the extension removes or encloses on the existing house.
If your design has more glass than that, you can still build it. Approved Document L offers another route: an area-weighted U-value for all the extension’s walls, roof, floor and glazing that beats a same-sized version that keeps to the limit. Thicker panels and better glass are how SIPs extensions usually get there.
How do you apply?
Either the local council’s building control service or a private approver registered for the work can handle it. Go through the council and you choose between two routes:
- Full plans. Drawings and calculations go in first. GOV.UK says a decision should come within 5 weeks, or 2 months if you agree.
- Building notice. Only for smaller projects. Work can start two days after the notice goes in, but you get no formal approval of the plans.
For a SIPs extension, full plans is usually the better choice. Panels are cut in the factory from the approved drawings, so you want any changes agreed before the order goes in, not after the lorry arrives.
What do you get at the end?
A completion certificate. GOV.UK says it usually arrives within 8 weeks of the work finishing, as long as the work complies. File it safely: when you sell, the buyer’s conveyancer will want to see it.
Parts of the job can be signed off by the tradesperson instead. If your electrician is registered with a competent person scheme, they can self-certify their work without a separate building regulations application.
Skip approval and the risks are real. GOV.UK warns that the person doing the work can be prosecuted and fined, building control can make you pay to put faulty work right, and you may not have the certificates you need when you sell.
Where next?
The SIP walls and SIPs roof panels pages show how the panels meet these rules in practice. When you are ready to price a SIPs extension, the form below finds you a firm that builds near you. There’s no charge and no obligation.