Skip to content
Get a quote

SIPs or brick: which is better for an extension?

The short answer

On price the two overlap, with SIPs often a little cheaper. SIPs win on speed on site and on wall thickness for the same warmth. Brick wins on familiarity, on matching a brick house without asking for planning permission, and on the number of builders who can do it.

On this page
  1. Which costs more, SIPs or brick?
  2. Which is faster to build?
  3. Which is warmer?
  4. Does planning treat them differently?
  5. Does either last longer?
  6. Which one should you choose?

Most people pricing an extension start with brick and block, because that is what their house is made of and what most local builders quote for. SIPs come up later, usually when someone mentions speed or warmth. Here is how the two really compare.

Which costs more, SIPs or brick?

Brick, usually, but not by as much as people expect. Here are the 2026 national guide figures, VAT included:

  • A finished SIPs extension: £1,300 to £2,400 per m² of floor.
  • Brick and block, single storey at a standard spec: £1,800 to £3,000 for each m².

Those two bands overlap, so a plain brick extension can come in under a high-spec SIPs one. London and the South East usually cost 20 to 40% more for both. These are a guide, not a quote. To price your own floor area, try the cost calculator.

Which is faster to build?

SIPs, on site. The panels are cut in a factory while your foundations go in, and the shell goes up in a few days, where brickwork rises course by course. Bad weather matters less once the shell is wrapped.

The catch is the time before anything arrives. Panels are made from final drawings, so the design and engineering have to be settled first. If you are still changing your mind about a window, brick is more forgiving.

Which is warmer?

Both can meet the same standard, and both have to. In England, Approved Document L sets 0.18 W/m²K for a new extension wall and 0.15 W/m²K for its roof, whatever they are made of.

The difference is how much wall it takes. A SIP wall reaches the target in less thickness than a cavity wall of brick and block, so on a narrow plot you keep a little more floor. SIPs also make an airtight shell easier to achieve, which helps keep heat in but means planning the ventilation properly.

Does planning treat them differently?

The rules are the same, but the look matters. Under householder permitted development in England, the outside of an extension should look much like the house it joins. A brick extension on a brick house meets that easily. Timber or composite cladding on SIPs often does not, which can mean a planning application.

There are two ways round it. Clad the SIPs in brick slips or a brick skin so it looks like the house, or apply for permission for the cladding you want. Our post on planning permission for a SIPs extension covers this in detail.

Does either last longer?

Both last for generations if they are built well and kept dry. Brick is the known quantity: everyone understands how it ages. SIPs depend on the OSB skins staying dry, which comes down to good detailing at the base, the eaves and every joint, plus a membrane and cladding that do their job. Our post on how long SIP panels last goes into this.

Ask any SIPs supplier which third-party certificate covers its panel system. Lenders, insurers and buyers’ surveyors look for one, and a supplier who can show it has nothing to hide.

Which one should you choose?

Go for SIPs if speed on site matters, the plot is tight, you want a vaulted ceiling without trusses in the way, or you are after a very warm, draught-free room.

Go for brick if the house is brick and you want to avoid a planning application, your drawings are still moving, or you want the widest choice of local builders.

Either way, the building regulations are the same and the room needs approval. When you are ready to price a SIPs extension, the form below finds you a firm that builds near you. There’s no charge and no obligation.

Where our information comes from

Get a quote for your SIPs extension

Your postcode, name, phone and email. That’s all.

We match homeowners with panel firms, free of charge, and do not build extensions ourselves. We look for a company that designs and erects SIPs extensions near your postcode and tell you its name. Your details go no further until you say yes.

How should we reach you?
Get a quote